Temporary, Contract, Project jobs in the Engineering category

This position understands complex electrical AC/DC theory as well as has the ability tfollow electrical drawings and schematics in order tapply this knowledge toperate, inspect, and repair equipment and systems. This position applies knowledge of work processes and prior experience tchoose correct solution.Works under close direction from senior Techs tperform assigned duties of a specialized natu...
full job description

We have a client looking for a contract Internal Auditor. After reading the job description if you feel you have the experience needed and you are interested, please email me a copy of your resume along with your availability and hourly rate. If you are not local it is your responsibility to relocate to the area. Position: Internal Auditor Department: Quality Assurance Shift: 1st Length: long-term...
full job description

We have an immediate opening for an Electronics Technicianin Santa Rosa, CA. Tekberry, a division of Proleon Software, is looking for a highly qualified and motivated Electronics Technicianto work on-site with our client; a world-class, Fortune 500 electronics company. Our clients rely on Tekberry to provide exceptional people to handle demanding short and long term contract technician assignments...
full job description

APC is seeking a Substation Protection and Controls Engineer (Mid-to-Senior level) for position in Plainfield, IN. Job Responsibilities: Provide engineering and technical expertise for the Substation Protection and Controls group. Perform modification and creation of single-line, three-line, relay and metering drawings and AC/DC schematics as part of the electrical design drawing package. Create p...
full job description

. Want a good opportunity to get some excellent experience and earn some money? Our client in Bothell, Wa has New openings for Electronics Test Technicians . These will go through the end of the year but, with solid performance, can be extended indefinitely. Recruiter: Mike Leeson Email: Mike.Leeson@AdeccoNA.com Rate: $17.00 Duration: To end of the year and possibily of beyond with good performanc...
full job description

Our client is a world leader in measurement and test equipments has an immediate need for a Calibration Technician Position: Electronics Lab Technician- Calibration Type: 12 -24 months Contract, Location: Kent, WA Rate: $20-24/hr on W2 Shift : 8:00am till 4:30pm Candidates should be able to pass background check and Drug test prior to start. Calibration experience preferred, either through militar...
full job description

Immediate consideration Senior Electrical Engineer, P.E level staff to respond to growing business/project needs at a great firm in the North End of Boston. This position is responsible for developing plans, specifications, reports and cost estimates on a number of concurrent projects and will assist our Electrical Engineers with project planning, managing schedules and budgets to complete work on...
full job description

Immediate direct or temp to direct opportunity for an Electrical Engineer with expertise in the Medical Device industry located Southeast of Boston Massachusetts. This person will design and develop electronics for various medical devices including medication infusion pumps, patient and in-vitro diagnostic systems and medical robotic systems. Candidate will have a BSEE and solid experience with em...
full job description

Our client in Long Beach is looking for a temp to hire Electrical Engineer serving the petrochemical, oil & gas, and petroleum refining industries. Responsibilities Provide QA/QC for field-generated sketches to complete the design of heavy industrial electrical and instrument systems. Develop single lines & electrical equipment specifications. Using ETAP or SKF, update facilities electical models....
full job description

A Fortune 500 energy company is currently seeking an Electrical Engineer (Position A) and an I&C Engineer (Position B) at Harris Nuclear Plant in New Hill, NC. These are CONTRACT positions scheduled to last 10 months, with the possibility of extension. Per diem will be available for qualified candidates. Actual pay rate will be commensurate with experience, so all qualified candidates are encourag...
full job description

Industrial and Electrical Instrument Designer is needed south of Tallahassee, FL for a 6 - 9 month 1st shift contract position. Must have industrial electrical design and drafting experience. Incredible hourly rate and benefits. Local candidates preferred. Now interviewing. Responsibilities You are responsible for field investigation, drafting, drawing, electrical schematics and taking dimensions ...
full job description

Electrical Designer with PDS experience is needed for one of the largest EPC companies in the world. You will work independently in the preparation of complex designs from which detailed construction drawings are completed. This is a contract position located in Houston, TX. Responsibilities Prepares calculations, design models, drawings and design documents Requires a broad knowledge of design an...
full job description

Currently looking for an Electrical Design Engineer who is a subject matter expert in fluidic design specifically working with appliances that control hot and cold fluid systems. Candidate will be responsible for developing electrical embedded control systems for beverage equipment, refrigerators, vending machines, ice makers and washing machines. This is a temp to hire position located in St. Pet...
full job description

Client has an IMMEDIATE NEED for Substation Protection & Control Engineers for a long term contract assignment based out of Newark, NJ. You need to have a BS degree in Electrical Engineering & 5-30+ years of experience designing the protection & control systems for HV substations & switchyards. Per diem available for candidates not local to the area. Responsibilities Review or modify & design elec...
full job description

A large Engineering firm is seeking an Electrical Engineer with 7+ years experience designing the electrical systems for industrial facilities. Candidate will primarily be responsible for designing power distribution (low/medium voltage), building systems such as fire alarm, security systems and arc flash hazards. BSEE and either a PE or EIT is required. Candidate can be located in any of the foll...
full job description

A Fortune 500 energy company is currently seeking 2 I&C Design Engineers (Position A) and 2 Electrical Design Engineers (Position B) with at least 5 years design engineering experience at an operating commercial nuclear facility preparing plant modifications, calculations and associated documents for Robinson Nuclear Plant in Hartsville, SC. These projects are scheduled to last 1 year, with the po...
full job description

Sr.Electrical Engineer needed for an oilfield product manufacturing company in Houston, TX. Salary will commensurate with experience so all qualified candidates are encouraged to apply. This is a contract to hire, or direct hire position. Responsibilities Design and deploy strategy related to Automation, Machinery Control and Traceability Conduct and evaluate studies concerning control systems and...
full job description

Temporary Electrical Inspector Description: Carry out site inspection tasks to support the project and client. Control the subcontractors and suppliers to ensure they meet contractual requirements. Responsibilities: 1. Client satisfaction, contract compliance, problem resolution, involved in managing the installation of the electrical system. 2. Ability to procure, manage and coordinate subcontrac...
full job description

. Adecco Engineering & Technical is currently seeking an experienced Electronic Engineer for our client in the Spokane, WA. area. Job Title: Electronic Engineer Telecom You must have unrestricted authorization to work in the United States Start Date: ASAP Duration: 1 year + Location: Spokane, WA. Resources Required: Qualified candidates please send an MS Word version of your resume to thomas.wirfs...
full job description

This is for a 6-12 mo. contract for a temp. to perm Position is responsible for technical　investigation and response to customer requests for Special Designs; provide prompt response on technical issues; ensure compliance with UL, CARB (California Air Research Board), EPA, and other regulatory requirements.　 2D & 3D CAD system experience required (CATIA preferred).　A plus -ensure compliance with U...
full job description

. Adecco Engineering & Technical is currently looking for an Mechanical /Industrial Engineering Specialist for our client in the Portland Metro area!!! -Qualified candidates please send an MS Word version of your resume to carol.heard@adeccona.com or call Carol Heard at (503) 535-2588 Required Typically a bachelor’s degree in mechanical, industrial, or energy engineering plus 0-2 years and or 3-5 ...
full job description

APC is seeking an I&C Engineer for a position in New Hill, NC. Job Description: The effort is in response to the NRC Near term Task Force (NTTF) Recommendation 4.2 following the Fukushima Dai-ichi earthquake and tsunami. Design Authority reviews will be performed for internal Engineering changes produced by the Major Projects group as well as Engineering changes outsourced to external A/Es. The En...
full job description

APC is seeking a I&C/Electrical Engineer Supervisor for a position in Hartsville, SC. This project will support development of modifications associated with Fukushima upgrades. The successful candidate will coordinate with project and implementation management and Architect Engineering (AE) firms to facilitate modification planning, development, installation, and start up. Job duties include: Dire...
full job description

Our client is the world's leading computer components company seeking a CAD Engineer to support projects designing printed circuit boards. Years of Experience & Expertise Level: 10 years, Senior Daily Responsibilities: PCB design Necessary skills: ALLEGRO Estimated length of assignment: 12 months Number of positions available: 1 Estimated hours per week: 40 % of travel required: 0 Telecommuting: N...
full job description

. Adecco Engineering and Technical, a division of the world leader in the recruitment of engineering and information technology professionals, has an immediate opening for an Electronic Technician on a contract opportunity with a leading company in Fort Worth. JOB REQUIREMENTS: ESD standards knowledge as they relate to ISO and IPC standards Component level repair Ability to solder Knowledge of Tec...
full job description